Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
Pavement maintenance is easy with Crafco’s purpose-built solutions.
Success is in the details. That’s why Crafco offers a range of tools to customize your pavement maintenance workflow. From preparation to final application, Crafco tools help boost your productivity, precision and efficiency.
Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
Metal bucket for transporting Mastic One or TechCrete from the Patcher II or 4 to the repair site. Has a 3 gallon capacity.
For application of thin crack sealant to a joint or crack. Gravity feed with shut off lever.
Use to apply a uniform band of sealant to a crack or joint. Wheeled for ease of use. Gravity feed with shut off lever.
Handles and distributes Mastic One from Patcher II or 4 to repair area. Propane heated, left and right side discharge gate, 10-gallon capacity. Not intended for melting and mixing mastic.
Applies Mastic One and TechCrete to the repair. Fill by using the Patcher chute, Hot Mastic Applicator, or Mastic Bucket. Several sizes available, from 8”x4”x3” to 8”x14”x6”.
Scrapes, cleans and removes mastic from the inside of the Patcher II & 4.
Scrapes and cleans Mastic One and TechCrete to scrape down the inside of the patcher walls and down the Patcher chute.
Applies Mastic One and TechCrete to the repair area. Also moves the mastic into place and levels it.
Use for straight asphalt and concrete joints. Available in 1/4” and 3/8” sizes.
Used for straight asphalt and concrete joints. Available in 1/4” and 3/8” sizes.
Used for random asphalt and concrete cracks. Available in 1/4” and 3/8” sizes.
Multi-purpose random cracks and joints. Use with a squeegee for most applications. Available in 3/8” and 1/2” sizes.
Use with Super Shot & EZ Series wands to prevent dripping of material
Use with Super Shot & EZ Series with or w/o Drip Stopper. Available in 3” and 4” sizes.
Used for overbanding. Great labor saver. Available in 3”, 4” and 6” sizes.
Use with Super Shot & EZ Series sealing tip. Stops sealant drip once wand trigger is released. Consist of Tip Adapter, Duckbill Valve and Shroud.
Torch fueled by LPG to provide a controlled flame to warm and dry pavement and to destroy vegetation within cracks. Available with 12’, 20’ or 50’ hose.
Uses cold compressed air to clean and remove debris from cracks and joints. Comes standard with a compressor on new melters. Two variants available for 50-70 CFM or 100 CFM compressors.
Uses hot compressed air to clean, dry, and remove debris from cracks and joints, delivering up to 2,600°F flameless hot air at 3,000 ft/second. Includes a lance, LPG regulator with gauge, air filter/water separator, wheel kit, and fittings. Available with 40’ or 60’ hose.
