Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
w/ Aluminum Handle – #27245
w/ Wooden Handle – #27245W
Replacement Blade – #27241
Pavement maintenance is easy with Crafco’s purpose-built solutions.
Success is in the details. That’s why Crafco offers a range of tools to customize your pavement maintenance workflow. From preparation to final application, Crafco tools help boost your productivity, precision and efficiency.
To order any of the tools below, just send a message to your Crafco representative or distributor.
You can also find some tools at your nearest Crafco Supply Center.
Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
w/ Aluminum Handle – #27245
w/ Wooden Handle – #27245W
Replacement Blade – #27241
Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
Squeegee – #27199
Replacement Blade – #27195
Metal bucket for transporting Mastic One or TechCrete from the Patcher II or 4 to the repair site. Has a 3.5 gallon capacity.
Bucket – #57781
For application of thin crack sealant to a joint or crack. Gravity feed with shut off lever.
Pour Pot – #40201
Use to apply a uniform band of sealant to a crack or joint. Wheeled for ease of use. Gravity feed with shut off lever.
Pour Pot with Wheels – #40200
Handles and distributes Mastic One from Patcher II or 4 to repair area. Propane heated, left and right side discharge gate, 10-gallon capacity. Not intended for melting and mixing mastic.
Hot Mastic Applicator – #57650
Use for leveling crack sealant and where a sealant over band is recommended. Replacement blades available.
Squeegee – #27245W
Replacement Blade – #27241W
Applies Mastic One and TechCrete to the repair. Fill by using the Patcher chute, Hot Mastic Applicator, or Mastic Bucket. Several sizes available, from 8”x4”x3” to 8”x14”x6”.
8”x4”x3” – #58550N
8”x4”x6” – #58540N
8”x8”x3” – #32350
8”x8”x6” – #32255
8”x10”x3” – #32351
8”x10”x6” – #32250
8”x12”x3” – #32352
8”x12”x6” – #32252
8”x14”x3” – #32353
8”x14”x6” – #32253
Scrapes, cleans and removes mastic from the inside of the Patcher II & 4.
Tank Scraper – #32258
Scrapes and cleans Mastic One and TechCrete to scrape down the inside of the patcher walls and down the Patcher chute.
Chute Scraper – #32246
Applies Mastic One and TechCrete to the repair area. Also moves the mastic into place and levels it.
Ironing Wand – #32243
Use for straight asphalt and concrete joints. Available in 1/4” and 3/8” sizes.
Sealing tip assembly 1/4” – #27146
Sealing tip assembly 3/8” – #27147
Used for straight asphalt and concrete joints. Available in 1/4” and 3/8” sizes.
Sealing tip/ft assembly 1/4” protruding – #27159
Sealing tip/ft assembly 3/8” protruding – #27160
Used for random asphalt and concrete cracks. Available in 1/4” and 3/8” sizes.
Sealing tip/ft assembly 1/4” flush – #27154
Sealing tip/ft assembly 3/8” flush – #27155
Multi-purpose random cracks and joints. Use with a squeegee for most applications. Available in 3/8” and 1/2” sizes.
Sealing tip assembly 3/8” – #27170
Sealing tip assembly 1/2” – #27171
Use with Super Shot & EZ Series wands to prevent dripping of material
Duckbill – #50270
Use with Super Shot & EZ Series with or w/o Drip Stopper. Available in 3” and 4” sizes.
3” Swivel Applicator – #27120
4” Swivel Applicator – #27130
Used for overbanding. Great labor saver. Available in 3”, 4” and 6” sizes.
3” Disk Assembly – #27162
4” Disk Assembly – #27163
6” Disk Assembly – #27164
Use with Super Shot & EZ Series sealing tip. Stops sealant drip once wand trigger is released. Consist of Tip Adapter, Duckbill Valve and Shroud.
Tip Adapter – #27114
Duckbill Valve – #50270
Shroud-Tip Adapter – #27115
Torch fueled by LPG to provide a controlled flame to warm and dry pavement and to destroy vegetation within cracks. Available with 12’, 20’ or 50’ hose.
w/ 20 ft. Hose – #25012
w/ 12 ft. Hose – #25016
w/ 50 ft. Hose – #25021
Uses cold compressed air to clean and remove debris from cracks and joints. Comes standard with a compressor on new melters. Two variants available for 50-70 CFM or 100 CFM compressors.
Cold Air Lance (for use with 50-70 CFM compressors) – #42648
Cold Air Lance, High Output (for use with 100 CFM compressors) – #47483N
Uses hot compressed air to clean, dry, and remove debris from cracks and joints, delivering up to 2,600°F flameless hot air at 3,000 ft/second. Includes a lance, LPG regulator with gauge, air filter/water separator, wheel kit, and fittings. Available with 40’ or 60’ hose.
w/ 40 ft. Hose – #45650
w/ 60 ft. Hose – #45660
Contact your Crafco representative or distributor, or visit your nearest Crafco Supply Center.
