Texas DOT saved $3.2M by using Crafco solutions across 72 lane miles, extending pavement life by 7+ years.
Safe roadways rely on pavement markers. Crafco Hot-Applied Flexible Pavement Marker Adhesive significantly reduces marker loss in both winter and summer, thanks to a high-performance formula with a wide temperature range.
Uniquely formulated with premium ingredients, Crafco’s Marker Adhesive remains flexible at temperatures down to 20°F (-7°C) and is specified by several state DOTs for its remarkable durability. Studies document 50-87% higher marker retention than standard bituminous marker adhesive (Type I) in heavy traffic conditions (>200,000 vehicles daily), with savings from retained markers offsetting any cost differential. Exceeds ASTM D4280 and D4383 Type II specifications.
Speed up your marker installation with the Crafco Shot Timer Kit to dispense a uniform amount of material with each trigger pull. Customize the timer to dispense your desired adhesive amount for precise application. Whether upgrading an existing melter or ordering the kit installed from the factory, you can set up a dedicated melter for marker adhesive or simply turn the Shot Timer on or off as needed. Contact your Crafco representative for more information.
The steps below are intended as an overview. Before installation, consult the product documentation for specific details
Texas DOT saved $3.2M by using Crafco solutions across 72 lane miles, extending pavement life by 7+ years.
City of Chicago reduced complaint calls by 82% after implementing a targeted preventive maintenance program.
Gouges, potholes and cracking are inevitable as bridge decks age. Crafco Mastic One and TechCrete are versatile, hot-applied mastics used to repair many kinds of distresses quickly and permanently, for both asphalt and concrete pavements.
Matrix asphaltic bridge joints are a versatile replacement option for other types of joints, providing a durable, fast, low-maintenance repair.
Protect new bridges with Ultraseal waterproofing for the bridge deck, Matrix bridge joints, and PoreShield for any concrete sections such as pavement slabs, barriers and even support structures.
Typically, our bridge deck membranes are ready for traffic within 24 hours of application, depending on temperature and humidity conditions. Please consult the product data sheet for specific cure times.
Typically, our bridge deck membranes are ready for traffic within 24 hours of application, depending on temperature and humidity conditions. Please consult the product data sheet for specific cure times.
Typically, our bridge deck membranes are ready for traffic within 24 hours of application, depending on temperature and humidity conditions. Please consult the product data sheet for specific cure times.
