Proper crack preparation can more than double the service life of your crack sealant – saving you both time and money in the long run. Below are the tools to use to ensure that cracks are correctly routed and cleaned before applying sealant.
Model 30 Router™
Routing and sealing pavement cracks with a Standard Recessed Band-Aid (or over-band) can increase sealant life by over two-times that of non-routed and sealed cracks. There are four different pavement router models, many options and different cutters to meet your demands and exceed your expectations. The Crafco Pavement Router has been the industry best for thirty years.
See all the Model 30 Routers on the Crafco Router page
Crack-Vac 2™
The Crafco Crack-Vac 2 is the environmentally effective way to remove dirt and debris from cracks, dust free*. Cracks are cleaned and dirt removed from the job site as fast as the cracks are sealed.
*The Crafco Crack-Vac 2’s HEPA-rated after-filter reduces fugitive dust and crystalline silica particulates to as little as .3 microns,* achieving the industry’s lowest occupational exposure limits (OELs).
 |
 |
Features and Benefits:
Learn More Brochure | Specifications | Operating Manual |
Heat Lance
The Heat Lance is used to dry and prepare pavement cracks, potholes and distressed pavement surfaces for repair. Featuring separate valves which control the mixture of fuel and compressed air at the point of combustion. The heat lance is also known by a variety of other terms such as hot air lance, hot-compressed air lance, air lance, and hot air blaster to name a few.
Features and Benefits:
- Remove vegetation and flammable debris
- Warm pavement in cool weather
- Dry moist pavement prior to sealing
- Velocity of up to 3000 ft per second
- Smooth and blend the edges of pavement repairs
Learn More Brochure | Operating Manual
